Price includes set-up and delivery in New England

AB-326 Bulldozer

Are you interested in saving $$thousands$$ with the purchase of a new Bulldozer???

The AB-326 series Dozers aka the "BOLTON Beasts" are available in a variety of powertrain and track configurations. The "Beast" is available with manual or hydrostatic clutches and either steel or rubber track systems. A solid reliable bulldozer for less than 1/2 the cost of a new U.S. built or Japanese model. If you need a small Dozer and work hard for your money, the Bolton Beast might be just what you need. Dozers are particularily useful where low ground loading and low C/G's are needed. We also don't call these babies "Beasts" for nothing. Tractors will do the job, but sometimes there is just no substitute for a Bulldozer. These little sweethearts also come equipped with a category 1 pto so you can run woodchippers, tillers or just about any other pto driven implement you need.

We maintain parts inventories and offer a 1 year limited warranty. Are you interested in an affordable Bulldozer? Then give us a call.

Call us about a dealership.

 

		AB-326ST Manual Transmission Steel Track	AB-326RT Manual Transmission Rubber Track	AB-326HST Hydrostatic Clutch, Steel Track	AB-326HRT Hydrostatic Clutch, Rubber Track.
Engine	3 Cylinder Wet Sleeved, 32 Hp @2,200 rpms Diesel
Cold starting aids	Decompression and glow plug
Clutch	Single Stage, Dry Disc
PTO	Rear, non-independent 540 and 1000 rpm.
Steering	FerroCeramic Steering Clutches and band brakes. Foot operated.
Hydraulic System	7.9 GPM front pump, 3 Point Hitch 2,230 psi relief.
3 Point Hitch	Category 1, with "float" mode (Capacity 1,600 lbs)
Instruments	Tachometer, Oil, Water, ammeter, fuel gauge Engine hours. Quartz halogen headlights and rear work light.
Steel Track system	11.8" shoes standard width. 10.2" optional. 5 track rollers botton, one top. adjustable helical spring for track tension. Semi-rigid track frame
Rubber Track system	Single piece. Same roller and sprocket system as Steel track system.
Manual Transmission	4X2 dual transmission drive system. 8 speeds forward and 2 speeds reverse. 10" dry clutch
Hydrostatic Clucth	Hydraulic shuttle shift 8 spd forward and 8 spd reverse.
Dimensions	87"H 65"W 116"L All Variations
Weight	Operating Weight	6,270 lbs	6,140 lbs	6,270 lbs	6,140 lbs
Suggested List Price (Fully Assembled)	Delivered ready to work in New England. Call for other destinations and crate pricing.	$14,500	$15,050	$15,550	$16,050